點擊放大

BAUMER HUBNER的詳細介紹

• 型   號：
• 更新時間：2018-03-15

BAUMER HUBNER的詳細介紹
:陳

價注意事項：1.請?zhí)峁?列的物料編號和第二列具體型號
2.請發書面詢價函（郵件，，傳真等），不接受口頭報價。
3.如果型號不能*對上，請?zhí)峁┯⑽钠放泼?具體型號+數量。
4.詢價的商友請主動告知公司名稱和，謝謝。

訂購留言

簡單介紹

BAUMER HUBNER、BAUMER HUBNER編碼器、BAUMER HUBNER傳感器、諾希德優勢提供BAUMER HUBNER產品。

:陳

價注意事項：1.請?zhí)峁?列的物料編號和第二列具體型號
       2.請發書面詢價函（郵件，，傳真等），不接受口頭報價。
       3.如果型號不能*對上，請?zhí)峁┯⑽钠放泼?具體型號+數量。
       4.詢價的商友請主動告知公司名稱和，謝謝。
BAUMER HUBNER的詳細介紹  BAUMER HUBNER的詳細介紹

Baumer（堡盟）產品，作為精密傳感器技術的 者，Baumer（堡盟）一直致力于工業自動化與過程控制產品的研制，在生產的精度、可靠性、穩定性、產品的多樣性以及有效需求上滿足客戶要求。在自動化物體傳感器行業有雄厚的基礎和地位，產品種類很多，精密傳感器制造的潮流。主要產品：接近開關、編碼器、超聲波傳感器、光纖傳感器、激光傳感器、色彩傳感器、重力傳感器等．．．

BAUMER HUBNER編碼器-HUBNER-BERLIN編碼器

BAUMER HUBNER（HUBNER-BERLIN）重載型編碼器

BAUMER HUBNER增量式編碼器

BAUMER HUBNER值編碼器

BAUMER HUBNER正余弦編碼器

BAUMER HUBNER重載型編碼器

BAUMER HUBNER編碼器+測速電機+速度開關

BAUMER HUBNER測速電機

BAUMER HUBNER超速開關

BAUMER HUBNER速度開關

BAUMER HUBNER防爆編碼器

BAUMER HUBNER附件

BAUMER HUBNER（HUBNER-BERLIN）編碼器產品系列：

TDP、HOG、TDPS、TDPZ、HDP、FOG、PF、OG、T701DG、HEAG、K、TRP、FSL、AMP、PMG、HMG11、HMG161、GTB、EExOG9、EExHOG161、EExGP、EExME12、AG、GT、GTF、FSL、HEAO、MP、C-FGH 6KK、FGH、HTL、GTR、AMG10、AMG11、AMG75、AMG81、AFE、SP、AS、PHF、DS、DSL、G、ES、ESH、ESL、APY、GMP、GMPZ、HML、MHG、OGS、HOGS、EGS14、AGS14、MHGS150、MHG400、MHGA400、ACC、ME11、HEK8、HENQ1100

Baumer Hübner HeavyDuty incremental encoders are characterized by the following excellent features:

• Robust construction with solid light alloy housing for high vibration and shock proof protection.
• Bearings at both ends of the shaft, where construction permits.
• Short-circuit proof power transistors with peak currents up to 300 mA for line driving over long cables with HTL-signals or optional TTL-signals to RS-422.
• High Electromagnetic Compatibility (EMC), tested to IEC 801-4.
• Protection against shaft currents due to insulated ball bearings, in some devices.
• Incremental encoders without bearings for drives with large axial play or high speeds.
• Through-hole hollow shaft, also available in Sinus-Technology and in explosion proof execution "II 2 G EEx de IIC T6".
• Wide range of program with standard EURO-Flange B10.
• Rear shaft option for mounting of other devices.
• Combinations with common shaft:
  - Incremental encoder + Incremental encoder (Twin Tacho),
  - Incremental encoder + Analog-Tacho,
  - Incremental encoder + Speed Switch.

Incremental Encoders are devices for measuring speed and position in drive technology。All Baumer Hübner devices are covered by a two-year warranty subject to the conditions of the Association of the German Electrical Engineering Industry (ZVEI).

with own bearings
OG 6
Square-wave cycles per turn:	100 - 512		Servo flange
Max. output frequency:	120 kHz		Solid shaft d= 6 mm
Logic level:	HTL (C), TTL, TTL (R)
Permissible encoder temperature:	-20 °C to +70 °C
Connection:	Internal connection terminals
Weight:	approx. 200 g
Shock resistance (6 ms):	1,000 m/s²
Protection class:	IP 54		Ex II 3G 3D
OG 60 • HOG 60
Square-wave cycles per turn:	max. 10,000		Servo flange (OG 60)
Max. output frequency:	250 kHz		Solid shaft d= 6 mm (OG 60)
Logic level:	HTL (C), TTL, TTL (R)		Hollow shaft with clamping ring up to d= 12 mm (HOG 60)
Permissible encoder temperature:	-30 °C to +85 °C
Connection:	Plug connection		High resolution
Weight:	approx. 260 g (OG 60) approx. 250 g (HOG 60)
Shock resistance (6 ms):	3,000 m/s²
Protection class:	IP 65		Ex II 3G 3D
OG 70 • HOG 70
Square-wave cycles per turn:	50 - 10,000		Servo flange (OG 70)
Max. output frequency:	250 kHz		Solid shaft d= 6 mm (OG 70)
Logic level:	HTL (C), TTL, TTL (R)		Hollow shaft up to d= 14 mm (HOG 70)
Permissible encoder temperature:	-20 °C to +85 °C
Connection:	Internal connection terminals
Weight:	approx. 360 g (OG 70) approx. 240 g (HOG 70)
Shock resistance (6 ms):	1,000 m/s²
Protection class:	IP 66		Ex II 3G 3D
OG 71 • HOG 71
Square-wave cycles per turn:	OG 71: 100 up to 1,024 HOG 71: 64 up to 2,048		Servo flange (OG 71)
Max. output frequency:	120 kHz		Solid shaft d= 6 mm (OG 71)
Logic level:	HTL (C), TTL, TTL (R)		Hollow shaft up to d= 14 mm (HOG 71)
Permissible encoder temperature:	-20 °C to +85 °C
Connection:	Internal terminal strip
Weight:	approx. 360 g (OG 71) approx. 240 g (HOG 71)
Shock resistance (6 ms):	1,000 m/s²
Protection class:	IP 66		Ex II 3G 3D
AHE 7 • AFE 7
Square-wave cycles per turn:	60 - 5,000		Version US of OG 71/•HOG 71
Max. output frequency:	120 kHz		1/2" hollow shaft (AHE 7)
Logic level:	HTL (C), TTL, TTL (R)		3/8" servo flange (AFE 7)
Permissible encoder temperature:	-30 °C to +70 °C		NPT 1/2" fitting
Connection:	Internal connection terminals
Weight:	approx. 240 g (AHE 7) approx. 380 g (AFE 7)
Shock resistance (6 ms):	1,000 m/s²
Protection class:	IP 56
HOG 75 • HOG 75 K
Square-wave cycles per turn:	250 - 2,500		Through-hole hollow shaft with clamping ring up to d= 26 mm (HOG 75)
Max. output frequency:	120 kHz
Logic level:	HTL, TTL		Cone shaft 1:10 (HOG 75 K)
Permissible encoder temperature:	-30 °C to +85 °C
Connection:	Internal connection terminals
Weight:	approx. 320 g
Shock resistance (6 ms):	2,000 m/s²
Protection class:	IP 56		Ex II 3G 3D
OG 8 • HOG 8
Square-wave cycles per turn:	1 - 2,500		EURO flange B10, solid shaft d= 11mm (OG 8)
Max. output frequency:	120 kHz		Through-hole hollow shaft with clamping ring up to d= 16 mm (HOG 8)
Logic level:	HTL (C), TTL, TTL (R)
Permissible encoder temperature:	-30 °C to +85 °C
Connection:	Internal connection terminals
Weight:	approx. 700 g (OG 8) approx. 550 g (HOG 8)
Shock resistance (6 ms):	1,000 m/s²
Protection class:	IP 54
OG 9
Square-wave cycles per turn:	1 - 1,250		EURO flange B10, solid shaft d= 11 mm
Max. output frequency:	120 kHz		High HTL output current
Logic level:	HTL, TTL, TTL (R)		Bearing at each end
Permissible encoder temperature:	-30 °C to +100 °C
Connection:	Terminal box
Weight:	approx. 900 g
Shock resistance (6 ms):	1,000 m/s²
Protection class:	IP 55		Ex II 3G 3D
OG 90
Square-wave cycles per turn:	1,000 - 10,000		EURO flange B10, solid shaft d= 11 mm
Max. output frequency:	250 kHz		High HTL output current
Logic level:	HTL (C), TTL, TTL (R)		High resolution
Permissible encoder temperature:	-30 °C to +85 °C
Connection:	Terminal box
Weight:	approx. 1.5 kg
Shock resistance (6 ms):	1,000 m/s²
Protection class:	IP 55
HOG 9 • HOG 9 G
Square-wave cycles per turn:	1 - 2,500		Hollow shaft with clamping element up to d= 16 mm
Max. output frequency:	120 kHz
Logic level:	HTL, TTL, TTL (R)		Option: Cone shaft 1:10
Permissible encoder temperature:	-30 °C to +100 °C		High HTL output current
Connection:	Plug connection		Bearing at each end
Weight:	approx. 700 g (HOG 9)		Protection against shaft currents
	approx. 1,100g (HOG 9G)		Twin encoder HOG 9 G
Shock resistance (6 ms):	1,000 m/s²
Protection class:	IP 56		Ex II 3G 3D
FOG 9
Square-wave cycles per turn:	1 - 2,500		EURO flange B10, solid shaft d= 11 mm
Max. output frequency:	120 kHz		High HTL output current
Logic level:	HTL, TTL, TTL (R)		Bearing at each end
Permissible encoder temperature:	-30 °C to +100 °C
Connection:	Plug connection
Weight:	approx. 860 g
Shock resistance (6 ms):	1,000 m/s²
Protection class:	IP 56		Ex II 3G 3D
POG 9
Square-wave cycles per turn:	1 - 2,500		EURO flange B10, solid shaft d= 11 mm
Max. output frequency:	120 kHz		High HTL output current
Logic level:	HTL, TTL, TTL (R)		Bearing at each end
Permissible encoder temperature:	-30 °C to +100 °C		Twin encoder POG 9 G
Connection:	Terminal box
Weight:	approx. 1.3 kg
Shock resistance (1 ms):	3,000 m/s²
Protection class:	IP 56		Ex II 3G 3D
POG 9 G
Square-wave cycles per turn:	1 - 2,500		EURO flange B10, solid shaft d= 11 mm
Max. output frequency:	120 kHz		High HTL output current
Logic level:	HTL, TTL, TTL (R)		Bearing at each end
Permissible encoder temperature:	-30 °C to +100 °C
Connection:	Terminal box
Weight:	approx. 1.7 kg
Shock resistance (1 ms):	3,000 m/s²
Protection class:	IP 56		Ex II 3G 3D
POG 90
Square-wave cycles per turn:	1,024 - 10,000		EURO flange B10, solid shaft d= 11 mm
Max. output frequency:	250 kHz		High HTL output current
Logic level:	HTL, TTL, TTL (R)		Bearing at each end
Permissible encoder temperature:	-20 °C to +85 °C		High resolution
Connection:	large terminal box
Weight:	approx. 1.5 kg
Shock resistance (11 ms):	1,000 m/s²
Protection class:	IP 66		Ex II 3G 3D
HOG 10
Square-wave cycles per turn:	1 - 2,500		Hollow shaft with clamping element up to d= 20 mm
Max. output frequency:	120 kHz
Logic level:	HTL, TTL, TTL (R)		Option: Cone shaft 1:10
Permissible encoder temperature:	-40 °C to +100 °C -50 °C to +100 °C (optional)		High HTL output current
Connection:	Internal connection terminals or large terminal box		Protection against shaft currents
Weight:	approx. 1.6 kg		Twin encoder HOG 10 G
Shock resistance (6 ms):	2,000 m/s²
Protection class:	IP 66		Ex II 3G 3D
HOG 10 G
Square-wave cycles per turn:	1 - 2,500		Hollow shaft with clamping element up to d= 20 mm
Max. output frequency:	120 kHz
Logic level:	HTL, TTL, TTL (R)		Option: Cone shaft 1:10
Permissible encoder temperature:	-40 °C to +100 °C -50 °C to +100 °C (optional)		High HTL output current
Connection:	Large terminal box		Protection against shaft currents
Weight:	approx. 2.2 kg
Shock resistance (6 ms):	2,000 m/s²
Protection class:	IP 66		Ex II 3G 3D
HOG 100
Square-wave cycles per turn:	1,024 - 10,000		Hollow shaft with clamping element up to d= 16 mm
Max. output frequency:	250 kHz
Logic level:	HTL, TTL		Option: Cone shaft 1:10
Permissible encoder temperature:	-30 °C to +85 °C		High HTL output current
Connection:	Internal connection terminals or large terminal box		High resolution
Weight:	approx. 1.5 kg		Protection against shaft currents
Shock resistance (6 ms):	1,000 m/s²
Protection class:	IP 66		Ex II 3G 3D
POG 10
Square-wave cycles per turn:	1 - 2,500		EURO flange B10, solid shaft d= 11 mm
Max. output frequency:	120 kHz		High HTL output current
Logic level:	HTL, TTL, TTL (R)		Bearing at each end
Permissible encoder temperature:	-40 °C to +100 °C -50 °C to +100 °C (optional)		Protection against inductive shaft currents with isolated coupling (e. g. K 35)
Connection:	Large terminal box
Weight:	approx. 1.6 kg		Twin encoder POG 10 G
Shock resistance (6 ms):	2,000 m/s²
Protection class:	IP 66
			Ex II 3G 3D
POG 10 G
Square-wave cycles per turn:	1 - 2,500		EURO flange B10, solid shaft d= 11 mm
Max. output frequency:	120 kHz		High HTL output current
Logic level:	HTL, TTL, TTL (R)		Bearing at each end
Permissible encoder temperature:	-40 °C to +100 °C -50 °C to +100 °C (optional)		Protection against inductive shaft currents with isolated coupling (e. g. K 35)
Connection:	Large terminal box
Weight:	approx. 2.4 kg
Shock resistance (6 ms):	2,000 m/s²
Protection class:	IP 66
			Ex II 3G 3D
HOG 11 (Offshore)
Square-wave cycles per turn:	1 - 2,500		Hollow shaft with clamping element up to d= 16 mm
Max. output frequency:	120 kHz		Option: Cone shaft 1:10
Logic level:	HTL, TTL, TTL (R)		Protection against inductive shaft currents
Permissible encoder temperature:	-30 °C to +100 °C		Special corrosion protection e.g. for offshore
Connection:	Large terminal box		Option: Hybrid bearing
Weight:	approx. 1.6 kg		Option: Earthing brush for capacitive shaft currents
Shock resistance (6 ms):	2,500 m/s²		Option: Heating for use down to -55°C
			Twin encoder HOG 11 G
Protection class:	IP 67		Ex II 3G 3D
HOG 11 G (Offshore)
Square-wave cycles per turn:	1 - 2,500		Hollow shaft with clamping element up to d= 16 mm
Max. output frequency:	120 kHz		Option: Cone shaft 1:10
Logic level:	HTL, TTL, TTL (R)		Protection against inductive shaft currents
Permissible encoder temperature:	-30 °C to +100 °C		Special corrosion protection e.g. for offshore
Connection:	Large terminal box		Option: Hybrid bearing
Weight:	approx. 2.2 kg		Option: Earthing brush for capacitive shaft currents
			Option: Heating for use down to -55°C
Shock resistance (6 ms):	2,500 m/s²
Protection class:	IP 67		Ex II 3G 3D
POG 11 (Offshore)
Square-wave cycles per turn:	1 - 2,500		EURO flange B10, solid shaft d= 11 mm
Max. output frequency:	120 kHz		Protection against inductive shaft currents with isolated coupling (e. g. K 35)
Logic level:	HTL, TTL, TTL (R)
Permissible encoder temperature:	-30 °C to +100 °C		Special corrosion protection e.g. for offshore
Connection:	Large terminal box		Option: Hybrid bearing
Weight:	approx. 1.8 kg		Option: Heating for use down to -55°C
Shock resistance (6 ms):	3,000 m/s²		Twin encoder POG 11 G
Protection class:	IP 67		Ex II 3G 3D
POG 11 G (Offshore)
Square-wave cycles per turn:	1 - 2,500		EURO flange B10, solid shaft d= 11 mm
Max. output frequency:	120 kHz		Protection against inductive shaft currents with isolated coupling (e. g. K 35)
Logic level:	HTL, TTL, TTL (R)
Permissible encoder temperature:	-30 °C to +100 °C		Special corrosion protection e.g. for offshore
Connection:	Large terminal box		Option: Hybrid bearing
Weight:	approx. 2.4 kg		Option: Heating for use down to -55°C
Shock resistance (6 ms):	3,000 m/s²
Protection class:	IP 67		Ex II 3G 3D
HOG 12
Square-wave cycles per turn:	600, 1,024		Through-hole hollow shaft with clamping ring up to d= 45 mm
Max. output frequency:	120 kHz
Logic level:	HTL (C), TTL, TTL (R)
Permissible encoder temperature:	-30 °C to +85 °C
Connection:	Cable connection
Weight:	approx. 1 kg
Shock resistance (6 ms):	1,000 m/s²
Protection class:	IP 54
HOG 131 (Offshore)
Square-wave cycles per turn:	1,024 - 3,072		Through-hole hollow shaft with clamping ring up to d= 36 mm
Max. output frequency:	120 kHz
Logic level:	HTL, TTL, TTL (R)
Permissible encoder temperature:	-40 °C to +100 °C
Connection:	Large terminal box
Weight:	approx. 4 kg
Shock resistance (6 ms):	2,000 m/s²
Protection class:	IP 56		Ex II 3G 3D
EGZ 14 • AG 14
Square-wave cycles per turn:	250 - 2,500		Through-hole hollow shaft up to d= 70 mm
Max. output frequency:	120 kHz		Especially for lift drives
Logic level:	HTL (C), TTL, TTL (R)
Permissible encoder temperature:	-30 °C to +70 °C
Connection:	Plug connection (EGZ 14) Terminal box or plug connection (AG 14)
Weight:	approx. 1.2 kg
Shock resistance (6 ms):	1,000 m/s²
Protection class:	IP 20, IP 54
HOG 16
Square-wave cycles per turn:	250 - 2,500		Through-hole hollow shaft with clamping element up to d= 38 mm
Max. output frequency:	120 kHz
Logic level:	HTL, TTL, TTL (R)		High HTL output current
Permissible encoder temperature:	-20 °C to +100 °C		Slip-ring earthing contact
Connection:	Terminal box		Option: Redundant scanning
Weight:	approx. 4 kg
Shock resistance (6 ms):	3,000 m/s²
Protection class:	IP 66		Ex II 3G 3D
HOG 161
Square-wave cycles per turn:	250 - 2,048		Through-hole hollow shaft with clamping ring up to d= 75 mm
Max. output frequency:	120 kHz
Logic level:	HTL, TTL, TTL (R)		Option: Redundant scanning
Permissible encoder temperature:	-20 °C to +85 °C
Connection:	Terminal box
Shock resistance (6 ms):	1,000 m/s²
Protection class:	IP 54
			Ex II 3G 3D
HOG 163 (Offshore)
Square-wave cycles per turn:	250 - 5,000		Through-hole hollow shaft with clamping ring up to d= 75 mm
Max. output frequency:	120 kHz
Logic level:	HTL, TTL, TTL (R)		Insulated bearings
Permissible encoder temperature:	-30 °C to +85 °C		Special corrosion protection
Connection:	Large terminal box		Option: Redundant scanning
Weight:	approx. 3.5 kg
Shock resistance (6 ms):	1,000 m/s²
Protection class:	IP 56		Ex II 3G 3D
HOG 165 (Offshore)
Square-wave cycles per turn:	250 - 5,000		Hollow shaft with clamping element up to d= 38 mm
Max. output frequency:	120 kHz
Logic level:	HTL, TTL, TTL (R)		Special corrosion protection
Permissible encoder temperature:	-30 °C to +100 °C		Option: Protection against shaft currents
Connection:	Large terminal box		Option: Slip-ring earthing contact
Weight:	approx. 4 kg		Option: Redundant scanning
Shock resistance (6 ms):	3,000 m/s²
Protection class:	IP 67		Ex II 3G 3D
HOG 22 • HOG 220
Square-wave cycles per turn:	HOG 22: (720 - 4,000) HOG 220: (1,024)		Through-hole hollow shaft with clamping ring up to d= 115 mm
Max. output frequency:	120 kHz
Logic level:	HOG 22: HTL (C), TTL, TTL (R) HOG 220: HTL, TTL, TTL (R)
Permissible encoder temperature:	-30 °C to +85 °C
Connection:	Terminal box or plug connection
Weight:	approx. 8.8 kg
Shock resistance (6 ms):	2,000 m/s²
Protection class:	HOG 22: IP 54 HOG 220: IP 56		Ex II 3G 3D
HOG 28
Square-wave cycles per turn:	1,024 - 2,048		Through-hole hollow shaft up to d= 150 mm
Max. output frequency:	120 kHz
Logic level:	HTL (C), TTL, TTL (R)
Permissible encoder temperature:	-30 °C to +85 °C
Connection:	Plug connection
Weight:	approx. 20 kg
Shock resistance (6 ms):	2,000 m/s²
Protection class:	IP 54		Ex II 3G 3D
HML 131 M
Square-wave cycles per turn:	128 - 2,048		Hollow shaft up to d= 36 mm
Max. output frequency:	200 kHz		Operable under oil
Logic level:	HTL (C), TTL, TTL (R)
Permissible encoder temperature:	-20 °C to +90 °C		Magnetic sensing
Connection:	Special connector		Redundant sensing
Weight:	approx. 2.2 kg
Shock resistance (12 ms):	2,000 m/s²
Protection class:	IP 68
... without own bearings
HG 6
Square-wave cycles per turn:	100 - 512		Servo flange
Max. output frequency:	120 kHz		Hollow shaft up to d= 16 mm
Logic level:	HTL (C), TTL, TTL (R)		Rugged construction without own bearings for very high speeds
Permissible encoder temperature:	-20 °C to +85°C
Connection:	Internal connection terminals		Incremental disk protected in axial and radial direction
Weight:	approx. 180 g
Shock resistance (6 ms):	1,000 m/s²
Protection class:	IP 56 / IP 23		Without own bearings
HG 16
Square-wave cycles per turn:	250 - 2,500		Through-hole hollow shaft with clamping ring up to d=  45 mm
Max. output frequency:	120 kHz
Logic level:	HTL, TTL, TTL (R)		Axial displacement max. - 0.5 mm, +1.5 mm Option: up to +2.5 mm
Permissible encoder temperature:	-30 °C to +100°C
Connection:	Terminal box, Option: Plug connection		Option: Redundant scanning
Weight:	approx. 2.4 kg
Shock resistance (6 ms):	1,000 m/s²
Protection class:	IP 56		Without own bearings
HG 18 • HG 22
Square-wave cycles per turn:	HG 18: 250 - 2,500 HG 22: 720 - 4,000		Through-hole hollow shaft with clamping ring up to d=  110 mm
Max. output frequency:	120 kHz
Logic level:	HTL (C), TTL, TTL (R)		Axial displacement max. - 0.5 mm, +1.5 mm Option: up to +2.5 mm
Permissible encoder temperature:	-30 °C to +70°C
Connection:	Terminal box, Option: Plug connection		Option: Redundant scanning
Weight:	HG 18: approx. 4.2 kg HG 22: approx. 5.8 kg
Shock resistance (6 ms):	1,000 m/s²
Protection class:	HG 18: IP 54, HG 22: IP 44		Without own bearings
HG 21 • HG 211
Square-wave cycles per turn:	2,500		Through-hole hollow shaft up to d=  95 mm
Max. output frequency:	120 kHz  Option: 160 kHz
Logic level:	HTL (C), TTL, TTL (R)		Axial displacement max. - 0.5 mm, +1.5 mm Option: up to +2.5 mm
Permissible encoder temperature:	-30 °C to +70 °C
Connection:	Connector		Option: redundant scanning
Weight:	approx. 5.8 kg
Shock resistance (6 ms):	1,000 m/s²
Protection class:	IP 44		Without own bearings
HMC 16 (M) + HEAG 158 V (M)
Square-wave cycles per turn:	128 - 8,192		Hollow shaft up to d= 55 mm
Max. output frequency:	2,000 kHz		Magnetic sensing
Logic level:	HTL, TTL
Permissible encoder temperature:	-30 °C / 0 °C to +70 °C / 105 °C		Redundant sensing (optional)
Connection:	12 pin mating connector (male contacts)
Weight:	approx. 2.4 kg
Shock resistance (12 ms):	3,000 m/s²
Protection class:	HMC 16 (M) - IP 68 HEAG 158 V (M) - IP 65
MHGE 100 B5
Square-wave cycles per turn:	64 ... 4096		Through-hole hollow shaft with d= 20 ... 80 mm
Logic level:	HTL, TTL		Large permissible axial displacement
Max. output frequency:	300 kHz		Large permissible air gap tolerance
Permissible encoder temperature:	-40 °C up to +100 °C		Option: additional incremental signals
Connection:	12 pole flange socket (ccw, pins)
Vibration resistance (55 Hz ... 2000 Hz):	300 m/s²
Shock resistance (2 ms):	3.000 m/s²
Protection class:	wheel IP 68 / head IP 67
MHGE 200 B5
Square-wave cycles per turn:	128 ... 8192		Through-hole hollow shaft with d= 50 ... 180 mm
Logic level:	HTL, TTL		Large permissible axial displacement
Max. output frequency:	300 kHz		Large permissible air gap tolerance
Permissible encoder temperature:	-40 °C up to +100 °C		Option: additional incremental signals
Connection:	12 pole flange socket (ccw, pins)
Vibration resistance (55 Hz ... 2000 Hz):	300 m/s²
Shock resistance (2 ms):	3.000 m/s²
Protection class:	wheel IP 68 / head IP 67
MHGE 400 B5
Square-wave cycles per turn:	256 ... 16384		Through-hole hollow shaft with d= 100 ... 380 mm
Logic level:	HTL, TTL		Large permissible axial displacement
Max. output frequency:	300 kHz		Large permissible air gap tolerance
Permissible encoder temperature:	-40 °C up to +100 °C		Option: additional incremental signals
Connection:	12 pole flange socket (ccw, pins)
Vibration resistance (55 Hz ... 2000 Hz):	300 m/s²
Shock resistance (2 ms):	3.000 m/s²
Protection class:	wheel IP 68 / head IP 67
MHGE 800 B5
Square-wave cycles per turn:	512 ... 32768		Through-hole hollow shaft with d= 380 ... 740 mm
Logic level:	HTL, TTL		Large permissible axial displacement
Max. output frequency:	300 kHz		Large permissible air gap tolerance
Permissible encoder temperature:	-40 °C up to +100 °C		Option: additional incremental signals
Connection:	12 pole flange socket (ccw, pins)
Vibration resistance (55 Hz ... 2000 Hz):	300 m/s²
Shock resistance (2 ms):	3.000 m/s²
Protection class:	wheel IP 68 / head IP 67
MHGP 100 B5
Square-wave cycles per turn:	64, 128, ... 1024, ... 131072		Through-hole hollow shaft with d= 20 ... 80 mm
Logic level:	HTL, TTL		Large permissible axial displacement
Max. output frequency:	300 kHz		Large permissible air gap tolerance
Permissible encoder temperature:	-20 °C up to +85 °C		Option: Error output
Connection:	12 pole flange socket (ccw, pins)
Vibration resistance (55 Hz ... 2000 Hz):	300 m/s²
Shock resistance (2 ms):	3.000 m/s²
Protection class:	wheel IP 68 / head IP 67
MHGP 200 B5
Square-wave cycles per turn:	128, 256, ... 1024, ... 262144		Through-hole hollow shaft with d= 50 ... 180 mm
Logic level:	HTL, TTL		Large permissible axial displacement
Max. output frequency:	300 kHz		Large permissible air gap tolerance
Permissible encoder temperature:	-20 °C up to +85 °C		Option: Error output
Connection:	12 pole flange socket (ccw, pins)
Vibration resistance (55 Hz ... 2000 Hz):	300 m/s²
Shock resistance (2 ms):	3.000 m/s²
Protection class:	wheel IP 68 / head IP 67
MHGP 400 B5
Square-wave cycles per turn:	256, 512, 1024, ... 524288		Through-hole hollow shaft with d= 100 ... 380 mm
Logic level:	HTL, TTL		Large permissible axial displacement
Max. output frequency:	300 kHz		Large permissible air gap tolerance
Permissible encoder temperature:	-20 °C up to +85 °C		Option: Error output
Connection:	12 pole flange socket (ccw, pins)
Vibration resistance (55 Hz ... 2000 Hz):	300 m/s²
Shock resistance (2 ms):	3.000 m/s²
Protection class:	wheel IP 68 / head IP 67
MHG 100  Download...
Square-wave cycles per turn:	64 - 1,024		Through-hole hollow shaft up to d= 80 mm
Maximum speed:	4,000 rpm
Logic level:	HTL		Tangential magnetic sensing
Permissible encoder temperature:	-40 °C to +85 °C		Large mounting tolerances
Moment of inertia:	approx. 17 kgcm²
Shock resistance (12 ms):	2,000 m/s²
Protection class:	IP 68		Without own bearings
MHG 150  Download...
Square-wave cycles per turn:	94 - 1,504		Through-hole hollow shaft up to d= 130 mm
Maximum speed:	4,000 rpm, Option: 12,000 rpm
Logic level:	TTL		Tangential magnetic sensing
Permissible encoder temperature:	-40 °C to +85 °C		Large mounting tolerances
Moment of inertia:	approx. 18.4 kgcm² (d=130 mm, without marker pulse) approx. 33.67 kgcm² (d=130 mm, with marker pulse)		Option: Marker pulse
Shock resistance (12 ms):	2,000 m/s²
Protection class:	IP 68		Without own bearings
MHG 400  Download...
Square-wave cycles per turn:	256 - 2,048		Through-hole hollow shaft up to d= 380 mm
Maximum speed:	3,000 rpm
Logic level:	HTL, TTL		Operation possible under oil or water
Permissible encoder temperature:	-20 °C to +95 °C		Tangential magnetic sensing
Moment of inertia:	approx. 1,118 kgcm² (d=380 mm)		Large mounting tolerances
Shock resistance (12 ms):	2,000 m/s²		Option: Special corrosion protection
Protection class:	IP 68		Option: Cover
			Without own bearings